UL2050 High Security IDS Intrusion Systems in Utah
Call Larry Love (801) 428 1384 Larry@PeakAlarm.com Peak Alarm web site ask for Larry Love for pricing for your high security installation such as secure facilities and SCIFs. Larry Love is certified through UL for designing for compliance to UL2050.
Peak Alarm holds the UL2050 listing for installation and monitoring
Peak has been in business since 1969 and has 4 offices to serve you.
Peak has a UL listed Central Station
Peak Alarm also has a full Guard and Patrol Division with unarmed and armed guards.
UL2050 installations are a bit different than normal security system installations:
1. We install an approved alarm system that will communicate using encrypted signals. Normally Bosch or DMP 2. Peak ALarm will install the entire system in CONDUIT with BOXES and Tampers in junction boxes were required. We grind the screws off the conduit after we install it. 3. Our installers will put tampers behind the alarm can and inside the alarm enclosure to sent an alarm if opened or pulled off the wall. 4. Motions in many of the facilities are required below and above the drop tile ceiling to meet UL2050 5. In most of our installations we install a vibration sensor inside the panel which will trip if there is drilling or tampering with the can. 6. Motions need to be in every area except restrooms. You can't take 3 steps without setting the alarm off. 7. A UL2050 installation also needs to be monitored by a UL2050 Central Station and Serviced by a company that is certified. 8. With the monitoring schedules and openings and closings need to be programmed in as part of the how the system is configured. 9. Special BMS Balanced Magnetic Switches that hold the High Security listing need to be used and these contacts cost over 10 times as much as a normal security contact.